“Classic” 3cm (1.2”) Fender Flares

Description

Make sure to read this – you will need to drill and cut your original fender flares and/or quarter panels in order to install these Classic 3cm fender flares on your car.
Our over-fenders are installed with rivets and bolts – you will need to drill your stock fenders and/or quarter panels.

You will need to install a lowered suspension and wider wheels to achieve the right stance.

Use a heat-gun (or a hair dryer) to heat up the flares and mold them into place to follow factory body lines. The flares are really pliable and that’s what sets them apart from fiberglass flares.

• Benefits:

– Adds +1.2 inches (3cm) per side
– May be blended in with your fenders or left with exposed rivets

• Hardware:
  For 1 pair of these Classic 3cm fender flares you need to buy:
  Nuts and bolts – 12 pcs – Choose between Type 1, Type 2 or Type
  Rubber seal– 2.7 meters